SZE-24YCA 2

　　本机特点：

　　PLC控制，油马达预塑，全液压驱动，自动循环;

　　塑化能力高，塑化温度可预选自控。

　　采用24点计量，使用时根据各工位模具要求，选定注射量。

　　设有空模选择功能。采用变频转位。

　　采用单缸直拉双联板剪式合模机构。

　　设有二次压力注射。设有先后压楦，合模顺序的选择功能。

　　圆盘转位平稳，快慢调整方便。

　　圆盘转位与塑化，注射工作供油分开控制。

　　工位多，定型时间长，易保证鞋底成型质量。

　　可选配伺服节能系统， 可节省电量30%左右。

　　Structure characteristics:

　　PLC controlled,pre plasticized by hydraulic motor,driven by full hydraulic pressure,and cycled automatically.

　　High plastifying capacity,the plastifying temperature can be controlled automatically by preselection.

　　It adopts 24 points measuring and the injection volume can be chosen according to the requirements of the moulds at each working position.

　　The function of empty mould selection has been provided.

　　Parallel mould plate closing mechanism is adopted,which linked with a toggle system operated by single cylinder.

　　The machine is equipped with two time pressure injection system and the cramp pressing and mould closing order selecting function.

　　The round table indexes smoothly and it’s movement can easily be adjusted.

　　The round table rotation,plasticizing and oil supply for the injection are controlled independently.

　　There are many working positions,the time for setting is longenough,andguarantees the setting quality of shoe soles.

　　Selecting servo energy conservation system to save about 30% energy.

　　主要技术参数：

　　以上技术规格仅供参考，如有任何变更或修改，恕不另行通知。

　　Technical specifications are indicative.Machines may undergo variations and/or modifications whithout any previous notice.